Spray Foam Insulation in Stratford
For homeowners thinking about home insulation, a question that keeps coming up is whether Spray Foam Insulation is right for their job. From the perspective of a professional contractor, the answer is usually YES - SFI is the best home insulation product available. When expertly installed, SFI creates an “insulation system” that is comprehensive and superior to anything else. For homeowners thinking about spray foam insulation in Stratford, this is a home improvement project that delivers benefits far beyond any other project.
Today, more and more professional installers are advising homeowners to install Spray Foam Insulation. It’s a superior product that delivers superior performance when compared with other products on the market. SFI is an effective application in attics and roofs, as well as walls and floors. Whatever the scope of a project, SFI will be the most comprehensive installation in terms of product and application. More and more, it has become a favorite for professionals, and continues to be recommended for residential home insulation.
- Spray Foam Insulation creates a finished space that is totally airtight (nothing compares)
- with SFI, the finished space will have higher R-Values than with other insulation products
- a good SFI application creates an air barrier that will effectively block any air movement
- at the same time, SFI creates a vapor barrier to effectively stop the collection of moisture
- when SFI is installed in framing, walls, and/or ceilings, the structural strength is enhanced
For the seasoned contractor, an airtight environment is essential for insulation to perform optimally. With a good application of Spray Foam Insulation, an airtight environment is guaranteed. Airtightness makes for much improved energy efficiency, much better HVAC performance, and much improved heating and cooling cycles. As a result, an average homeowner will realize very significant energy savings from season to season. In fact, the annual savings on electricity and/or natural gas can often offset the project cost as a whole.
Spray foam is also known in the industry as Spray Polyurethane Foam. It was used for so many years as an insulator for cold rooms, freezer units, and coolers. But today, after numerous product innovations, SPF has gained popularity as a superior home insulation product. It’s especially well suited for the roof and attic, as well as the basement and garage. These are all spaces where air and moisture can be problematical when it comes to home comfort. And this is exactly where SPF can provide the maximum in sealing and insulating.
The installation of Spray Polyurethane Foam necessitates professional attention. Firstly, the compounds will need careful handling. Secondly, the job-site will need special preparation. And finally, the equipment needs expertise and proficiency. Professional insulation contractors have that expertise: they have the know-how to spray the foam uniformly and consistently; they know how to create an “insulation envelope” as the foam spreads, expands and hardens; and most importantly, they know how to assure optimum sealing.
SPF is the professional favorite because it so effectively blocks air and moisture. In the finished space, air leakage is eliminated and moisture is effectively prevented from accumulating. There is no need to install a freestanding vapor barrier. Essentially, the SPF application creates an airtight environment that does it all: an air barrier, vapor barrier, and thermal insulation in one. Overall, for the average homeowner, SPF makes for a home improvement project that is far more cost-worthy than any other conventional home project.
Professionally installed, Spray Polyurethane Foam can bring numerous benefits to any building. The benefits are long lasting, and the payoffs are considerable: much improved energy efficiency; much improved HVAC performance; and much reduced energy consumption. Probably the most important are the energy savings, whether it’s a residential home or a commercial building. And with SPF, the annual savings on natural gas and electricity can contribute substantially in offsetting the original project investment.
For homeowners thinking about installing spray foam insulation in Stratford, it’s highly recommended to work with a professional contractor who will make sure that the job is done right. Hiring a professional has advantages: professional installers obey the building code and follow various by-laws. They don’t take any shortcuts, and they install according to manufacturer’s specifications. With a professional installation, Spray Polyurethane Foam will perform at maximum – the installed space will ensure the best possible outcomes.
Professionals can also guarantee the highest standard of workmanship. At Great Northern Insulation, quality is key on every project, and that includes installing the best quality products. GNI installers are experts with SPF. They are highly trained, certified, and licensed; they guarantee worksite safety; they prep the jobsite appropriately; and they ensure occupant safety throughout the duration of the install. GNI projects are well planned and executed, with customer satisfaction at the forefront. GNI does it right the first time.
Whatever the project, an SPF installation requires expertise. The foam compounds need special handling; the equipment needs proficiency; and most projects need some degree of troubleshooting. This is not work for a DIY enthusiast. The dangers/risks are beyond the abilities of an average homeowner. And in a worst-case situation, a poorly installed DIY effort may need a complete rework. At this stage, removal, repairs, and reinstallation could pose additional challenges and could eventually get quite expensive.
SPF is recognized as a superior insulation product, which is why it’s become a favorite for new construction, major retrofits, and renovations (residential and commercial). Project outcomes are impressive, and energy savings are considerable. For roofs, attics, and basements, there’s no better product than SPF, and no other product that can deliver the same degree of homeowner benefits, while ensuring long-term savings.
Spray Polyurethane Foam is known as a high-value installation. Hence, it’s not suitable for all budgets. But the outcomes are always impressive. The SPF install will last a lifetime, without the need to replace or replenish. As well, the payback period (about 2 to 7 years) can substantially offset the original project cost. In terms of bottom line: there are very few home improvement projects that are as cost-worthy.