Attic Insulation in Gloucester

Name: Great Northern Insulation
Telephone: 1-800-265-1914

If you’re installing attic insulation in Gloucester, there are a few priorities to consider. For most, the priority of improved comfort is at the top of the list. At the same time, improved energy efficiency should also be considered a priority – it will reduce energy waste, improve energy consumption, and significantly lower heating and cooling costs. That’s exactly where quality attic insulation plays a part. Going with a quality approach to product and installation will make a big difference year after year.

If You’re Installing Attic Insulation in Gloucester, it’s Better to do it Right

For attic insulation in Gloucester, it’s better to do it right the first time. As a matter of fact, with attic insulation there’s much more to think about than just insulation. For optimum energy efficiency, the attic space must be totally air-sealed and appropriately ventilated. The best results are achieved with a “system” – a combination of insulation, air sealing and ventilation. This will ensure long-term energy efficiency.

Some of the many benefits of installing attic insulation:

good quality insulation stops “heat loss” from the attic
heating and air cooling cycles are much better balanced
accumulation of undesirable air moisture is prevented
air leakage in the attic (winter/summer) is obstructed
indoor air circulation is better controlled and balanced
undesirable air movement in the attic/roof is blocked

Boosting Home Energy Efficiency Depends on More than Only Insulation

Homeowners installing attic insulation in Gloucester should understand that insulation is only part of a complete “system”. To maximize home energy efficiency, that “system” depends on both air sealing and ventilation. To begin with, a sealed attic effectively prevents indoor heat from escaping in winter. Air sealing also prevents outdoor heat from intruding in summer. Ventilation will complete the “system”.

In the Attic, a High Quality Insulation Product is Integral to the “System”

To effectively insulate any space, every insulation product requires both an air barrier and a vapour barrier. All working together, these components will prevent air movement and moisture collection. Professional contractors will usually install a complete “system” (with all of the components) to ensure long-term home energy efficiency. Anything less would prevent maximum insulation performance.

Some Obvious Signs that your Existing Attic Insulation Needs Upgrades

Most traditional insulation products will degrade over time. That means that your attic insulation will eventually lose integrity and performance. In the attic, poor performance has obvious symptoms. Some areas of your home will be overly drafty. Your HVAC equipment (heating and cooling) will overwork. Worse still, your heating and cooling bills will be much higher than usual from one season to the next.

Option 1 for the Attic - Spray Foam Insulation

For professionals, spray foam insulation has become the product-of-choice in the attic. Spray foam does a comprehensive job – it provides an insulation barrier, air barrier, and vapour barrier in a single application. Choosing spray foam insulation for your attic is an investment with long-term value. No other product will effectively seal and insulate the attic – energy efficiency is without comparison.

Option 2 for the Attic - Fibreglass Batt Insulation

If you’re installing attic insulation in Gloucester, fibreglass batt insulation offers satisfactory results. The installation cost is reasonable, and long-term performance is reliable. However, fibreglass batts still require effective air sealing and air ventilation. This means installing a separate air barrier and vapour barrier, while the batts provide thermal protection. A complete “system” must be installed.

Option 3 for the Attic - Blown in Insulation

Blown in insulation has always been a popular product for the attic. Available in cellulose or fiberglass, both products have comparable benefits, although cellulose has slightly better R-Value. In the attic and roof cavity, it’s essential to install both an air barrier and vapour barrier when the insulation product is installed. Here again, both of these components are required for optimal performance of insulation.

Option 4 for the Attic - Mineral Wool Insulation

Mineral wool insulation is not that well known as an attic insulation product. It provides good thermal insulation as well as sound dampening properties. Mineral wool insulation is made from renewable resources, so it will satisfy a homeowner’s prerequisite of installing a product that is environmentally friendly. With a professional install, improved home energy efficiency will save on annual utilities.

With Attic Insulation - it’s Much Better to Work with Professionals

For homeowners installing attic insulation in Gloucester, a DIY approach might be an attractive option. Naturally, this is a way to save money, but this is also short-term thinking. Attic insulation requires a professional for best results. With a professional insulation contractor on hand, you are assured of home energy solutions that meet your needs, with problems that are properly addressed.

For the inexperienced, a DIY approach can present a host of problems. Professional installers will troubleshoot problems and recommend viable solutions. Even with an inexperienced contractor there could be unanticipated problems, especially if that contractor is not certified or insured. In short, attic insulation work must be done right, with a contractor who is experienced and a company guarantee.

For Attic Insulation in Gloucester, Count on Insultech for the Best Results

In Gloucester, and throughout the Ottawa region, Insultech provides homeowners with an in-depth energy assessment, as well as recommendations for installation. As a division of Great Northern Insulation, Insultech provides expert installers who are highly trained and industry certified.

With home attic insulation, we encourage customers to compare local contractors. At the same time, we’re confident that our quality approach remains unmatched in the industry. Our professional team will recommend the product and installation that suits the need, while providing the best results.

Find out more about Insultech products and services by calling 1-800-265-1914 and speaking with one of our professionals. We’ll arrange for a FREE in-home energy assessment, and get your attic insulation project started. We’ll assess the space, identify problem areas, and recommend the most cost-effective upgrades and retrofits. You can also find out more about our services by visiting at https://www.gni.ca/.